Iskalni niz:
išči po
išči po
išči po
išči po
Vrsta gradiva:
Jezik:
Št. zadetkov: 5
Initial transient phase and stability of annular laser beam direct wire deposition
Matjaž Kotar, Makoto Fujishima, Gideon N. Levy, Edvard Govekar
Izvirni znanstveni članek
Oznake: additive manufacturing;lasers;wire;
In this paper the stability of the annular laser beam (ALB) direct wire-deposition process, which enables process symmetry and a well-defined ALB workpiece irradiation proportion (WIP) and related energy input onto the workpiece and the wire surface is considered. Various initial process phase strat ...
Leto: 2019 Vir: Fakulteta za strojništvo (UL FS)
Advances in the understanding of the annular laser beam wire cladding process
Matjaž Kotar, Makoto Fujishima, Gideon N. Levy, Edvard Govekar
Izvirni znanstveni članek
Oznake: annular laser beam;laser wire cladding;nominal workpiece irradiation proportion;process stability;clad geometry;melt pool and workpiece temperature;
This paper experimentally studies the influence of conventional process parameters (laser beam power, P, workpiece, and wire feeding velocities), and the nominal workpiece irradiation proportion WIPN parameter, on ALB-WC process stability and generated clad geometry. The study was based on an extens ...
Leto: 2021 Vir: Fakulteta za strojništvo (UL FS)
Annular laser beam cladding process feasibility study
Alexander Kuznetsov, Andrej Jeromen, Gideon Levy, Makoto Fujishima, Edvard Govekar
Objavljeni znanstveni prispevek na konferenci
Oznake: kolobarjasti laserski žarki;navarjanje prahu;procesni parametri;izkoristek prahu;annular laser beams;powder cladding;process parameters;powder catchment efficiency;
In the paper a novel annular "ring shaped" laser beam cladding head and related cladding process are presented. In the cladding head a laser beam is shaped into an annular ring and guided coaxially with the powder tube disposing the powder jet in the centre of the focused annular laser beam ring. An ...
Leto: 2016 Vir: Fakulteta za strojništvo (UL FS)
Study of an annular laser beam based axially-fed powder cladding process
Edvard Govekar, Andrej Jeromen, Alexander Kuznetsov, Gideon N. Levy, Makoto Fujishima
Izvirni znanstveni članek
Oznake: additive manufacturing;lasers;powder;
An annular laser beam based powder cladding head, which enables an axial powder feeding and variation of the laser beam intensity distribution (LBID) on the workpiece surface is presented. The influence of typical LBIDs, including Ring, Tophat(-), Tophat(+), and Gaussian-like, on a cladding process ...
Leto: 2018 Vir: Fakulteta za strojništvo (UL FS)
Powder particle–wall collision-based design of the discrete axial nozzle-exit shape in direct laser deposition
Andrej Jeromen, Ana Vidergar, Makoto Fujishima, Gideon N. Levy, Edvard Govekar
Izvirni znanstveni članek
Oznake: direct laser deposition;axial nozzle shapes;wall-collision-dominated flow;powder-stream distribution;powder-catchment efficiency;
To improve the efficiency of the direct laser deposition (DLD) of metal powders, a concentrated powder-stream distribution is required, which can be affected by the shape of the powder-delivery nozzle. In this study, a simplified, powder particle–wall collision-based 3D numerical model of the powder ...
Leto: 2022 Vir: Fakulteta za strojništvo (UL FS)
Št. zadetkov: 5
Ključne besede:
Leto izdaje:
Avtorji:
Repozitorij:
Tipologija:
Jezik: