Iskalni niz:
išči po
išči po
išči po
išči po
Vrsta gradiva:
Jezik:
Št. zadetkov: 22
Experimental investigation of electrical discharge machining of Inconel 718 using a TiB[sub]2-Cu sintered composite electrode
P. Mathan Kumar, K. Sivakumar, S. M. Vinu Kumar
Izvirni znanstveni članek
Oznake: electrical discharge machining;powder metallurgy;Inconel 718;response surface methodology;
Experimental investigation of electrical discharge machining of Inconel 718 using a TiB[sub]2-Cu sintered composite electrode
Leto: 2022 Vir: Inštitut za kovinske materiale in tehnologije (IMT)
Effect of salt-water aging on the mechanical properties of flax-woven fabric-reinforced epoxy composites
S. M. Vinu Kumar, C. Sasikumar, E. Sakthivelmurugan, J. P. Rishi
Izvirni znanstveni članek
Oznake: flax/epoxy composites;DMA;moisture absorption;silane treatment;NFRP;
Effect of salt-water aging on the mechanical properties of flax-woven fabric-reinforced epoxy composites
Leto: 2021 Vir: Inštitut za kovinske materiale in tehnologije (IMT)
Experimental study of the effect of fine aggregate in pervious concrete
R. Rahul, M. S. Ravikumar
Izvirni znanstveni članek
Oznake: compressive strength;mix ratios;pervious concrete;porosity;split tensile strength;void ratio;
Leto: 2025 Vir: Inštitut za kovinske materiale in tehnologije (IMT)
Strategic marketing management
Richard M. S. Wilson, Colin Gilligan
Ni določena
Oznake: marketing;trženje;vodenje;management;strategija trženja;manager;strateško upravljanje;revizija;kontrola;SWOT analiza;segmentacija;cilj;pozicioniranje;portfolio;proizvodi;teorija racionalnih pričakovanj;racionalizacija;konkurenca;poslovno komuniciranje;komuniciranje;potrošnik;struktura;promocija;evalvacija;ocenjevanje;modeliranje;Marketing;Učbeniki za visoke šole;Management;Marketinška strategija;Tržna miselnost;Implementacija;Strateško planiranje;Strokovni priročnik;Strateški položaj;Strateški management;Kontrolni sistemi;
Strategic marketing management : planning, implementation and control
Leto: 1998 Vir: Ekonomsko-poslovna fakulteta (UM EPF)
Development of a co-extruded Al-Ti bimetal composite
S. Arunkumar, M. S. Alphin, Z. Edward Kennedy, N. Sriraman
Izvirni znanstveni članek
Oznake: extrusion;aluminium;titanium;mechanical properties;tribological properties;
Development of a co-extruded Al-Ti bimetal composite
Leto: 2022 Vir: Inštitut za kovinske materiale in tehnologije (IMT)
Investigation on microstructural and geometrical characterization of cold metal transfer hardfaced Inconel 718 on medium carbon steel
P. Keerthivasan, S. M. Sivagami, T. Raja Vijay, N. Annamalai
Izvirni znanstveni članek
Oznake: cold metal transfer (CMT);Inconel 718;hardfacing;process parameters;bead geometry;
Leto: 2025 Vir: Inštitut za kovinske materiale in tehnologije (IMT)
Lucifer Yellow uptake by CHO cells exposed to magnetic and electric pulses
Leila Towhidi, S. M. P. Firoozabadi, Hossein Mozdarani, Damijan Miklavčič
Izvirni znanstveni članek
Oznake: electroporation;electro-endocytosis;time-varying magnetic field;transmembrane molecular transport;
Lucifer Yellow uptake by CHO cells exposed to magnetic and electric pulses
Leto: 2012 Vir: Repozitorij Univerze v Ljubljani (RUL)
The exploatation of friction forces for improving the rolling processes
S.M. Juchkov, A.P. Lochmatov, Ilija Mamuzič, E.V. Binakevich, V.B. Shynkarenko
Izvirni znanstveni članek
Oznake: rolling;friction force;non drive stand;strip bending stability;
Predložena je metoda za implementacijo pogojev za netradicionalni proces valjanja. Pogoji za implementacijo so odvisni od rezerve torne sile in upogibne stabilnosti traka pred valjalniškim ogrodjem brez pogona so določeni analitično.
Leto: 1999 Vir: dLib.si Digitalna knjižnica Slovenije
Transverse compression of a thin elastic disc
Ahmed S. M. Alzaidi, Julius Kaplunov, Anatolij Viktorovič Nikonov, Barbara Zupančič
Izvirni znanstveni članek
Oznake: thin elastic discs;asymptotic;compression;boundary layer;mixed condition;
The mathematical formulations for transverse compression of a thin elastic disc are considered, including various boundary conditions along the faces of the disc. The mixed boundary conditions corresponding to the loading by normal stresses in absence of sliding are studied in detail. These conditio ...
Leto: 2024 Vir: Fakulteta za strojništvo (UL FS)
Transverse compression of a thin inhomogeneous elastic layer
Ahmed S. M. Alzaidi, Julius Kaplunov, Barbara Zupančič, Anatolij Viktorovič Nikonov
Izvirni znanstveni članek
Oznake: tanka elastična plast;asimptotika;transverzalna kompresija;nehomogenost;funkcionalno razvrščeni materiali;thin elastic layer;asymptotic;transverse compression;inhomogeneity;functionally graded materials;
A 3D problem in linear elasticity is considered for a thin inhomogeneous layer subject to transverse compression. For the first time, the effect of arbitrary vertical inhomogeneity is elucidated. Two sets of boundary conditions along the faces of the layer are adapted for modelling transverse compre ...
Leto: 2024 Vir: Fakulteta za strojništvo (UL FS)
Št. zadetkov: 22
Ključne besede:
Leto izdaje:
Avtorji:
Repozitorij:
Tipologija:
Jezik: