Iskalni niz:
išči po
išči po
išči po
išči po
Vrsta gradiva:
Jezik:
Št. zadetkov: 31
ǂThe ǂeffect of surface pretreatment of aluminum alloy 7075-T6 on the subsequent inhibition by cerium(III) acetate in chloride-containing solution
Ingrid Milošev, Peter Rodič
Izvirni znanstveni članek
Oznake:
Leto: 2022 Vir: Institut Jožef Stefan (IJS)
Complementary corrosion protection of cast AlSi7Mg0.3 alloy using Zr-Cr conversion and polyacrylic/siloxane-silica multilayer coatings
Peter Rodič, Barbara Kapun, Ingrid Milošev
Izvirni znanstveni članek
Oznake: korozija;zaščita;aluminij;corrosion-protective;aluminium;material;
Aluminium cast alloy AlSi7Mg0.3 is a lightweight metal commonly used in automotive, aeronautical and mechanical applications. It has good corrosion resistance but, under harsh operative conditions, would benefit from additional protection. In this study, a corrosion-protective multilayer coating sys ...
Leto: 2024 Vir: Institut Jožef Stefan (IJS)
ǂThe ǂeffect of pore sealing in a multilayer Si–O–Zr/Al[sub]2O[sub]3 coating designed to protect aluminium from corrosion
Peter Rodič, Barbara Kapun, Ingrid Milošev
Izvirni znanstveni članek
Oznake: aluminum;corrosion;hybrid sol-gel;atomic layer deposition;pore sealing;
This study deals with the combination of two corrosion protection strategies for aluminium: barrier protection (provided by a 3.8 μm thick hybrid sol–gel coating) and aluminium pore sealing via the use of a 100 nm thick layer of aluminium oxide. A Si–O–Zr hybrid sol–gel coating (TMZ) was synthesised ...
Leto: 2023 Vir: Institut Jožef Stefan (IJS)
Durable polyacrylic/siloxane-silica coating for the protection of cast AlSi7Mg0.3 alloy against corrosion in chloride solution
Peter Rodič, Barbara Kapun, Ingrid Milošev
Izvirni znanstveni članek
Oznake: aluminum alloys;corrosion;hybrid sol-gel;Machu test;
This study presented a novel corrosion protective coating based on polyacrylic/siloxane-silica (PEHA-SS) deposited on lightweight cast aluminium alloy AlSi7Mg0.3. The synthesis of PEHA-SS comprises organic monomer 2-ethylhexyl acrylate and organically modified silane 3-(trimethoxysilyl)propyl methac ...
Leto: 2023 Vir: Institut Jožef Stefan (IJS)
ǂThe ǂrelation between the microstructure of aluminum alloy 7075-t6 and the type of cerium salt in the formation of the cerium conversion layer
Ingrid Milošev, Barbara Kapun, Peter Rodič
Izvirni znanstveni članek
Oznake:
Leto: 2022 Vir: Institut Jožef Stefan (IJS)
Superhydrophobic aluminium surface to enhance corrosion resistance and obtain self-cleaning and anti-icing ability
Peter Rodič, Barbara Kapun, Ingrid Milošev
Izvirni znanstveni članek
Oznake: aluminium;superhydrophobic surface;corrosion;self-cleaning;anti-icing;
Leto: 2022 Vir: Institut Jožef Stefan (IJS)
Corrosion of synthetic intermetallic compounds and AA7075-T6 in dilute Harrison's solution and inhibition by cerium(III) salts
Peter Rodič, Ingrid Milošev, Gerald S. Frankel
Izvirni znanstveni članek
Oznake: aluminijeva zlitina;soli v atmosferi;korozija;karakterizacija;aluminum alloy;atmospheric salts;corrosion;sample characterization;
This study addresses the behavior of an aluminum alloy and its components in conditions simulating the presence of atmospheric salts. The corrosion of synthetic intermetallic compounds (IMCs) Al2Cu, Al2CuMg, Al7Cu2Fe, MgZn2, and bulk aluminum alloy 7075-T6 was studied in dilute Harrison’s solution ( ...
Leto: 2023 Vir: Institut Jožef Stefan (IJS)
ǂThe ǂeffect of laser structuring parameters on Ti6A14 V topography and composition
Barbara Kapun, Matic Može, Ingrid Milošev, Peter Rodič
Objavljeni znanstveni prispevek na konferenci
Oznake: materials;composition;
The effect of laser structuring parameters on Ti6A14 V topography and composition
Leto: 2024 Vir: Fakulteta za strojništvo (UL FS)
The effect of metallographic preparation on the surface characteristics and corrosion behaviour of Ti-6Al-4V alloy in simulated physiological solutions
Ingrid Milošev, Denis Sačer, Barbara Kapun, Peter Rodič
Izvirni znanstveni članek
Oznake: obdelala površin;metalografika;poliranje;
This study aimed to determine the effect of surface metallographic preparation (grinding, diamond polishing, and chemo-mechanical polishing using silica and hydrogen peroxide) on the surface roughness, morphology, chemical composition, and electrochemical behaviour of Ti-6Al-4V alloy. Roughness decr ...
Leto: 2024 Vir: Institut Jožef Stefan (IJS)
Functionalisation of the aluminium surface by cucl2 chemical etching and perfluoro silane grafting
Peter Rodič, Matic Može, Iztok Golobič, Ingrid Milošev
Izvirni znanstveni članek
Oznake: superhidrofobna površina;korozijska zaščita;samočistilni učinek;preprečevanje zmrzovanja;superhydrophobic surface;corrosion protection;self-cleaning;anti-icing;
This study aimed to prepare a facile hierarchical aluminium surface using a two-step process consisting of chemical etching in selected concentrations of CuCl2 solution and surface grafting through immersion in an ethanol solution containing 1H, 1H, 2H, 2H-perfluorodecyltriethoxysilane. The goal was ...
Leto: 2024 Vir: Institut Jožef Stefan (IJS)
Št. zadetkov: 31
Ključne besede:
Leto izdaje:
Avtorji:
Repozitorij:
Tipologija:
Jezik: