Iskalni niz:
išči po
išči po
išči po
išči po
Vrsta gradiva:
Jezik:
Št. zadetkov: 9
Effect of two-step sintering on properties of alumina ceramics containing waste alumina powder
Milan Vukšić, Irena Žmak, Lidija Ćurković, Andraž Kocjan
Izvirni znanstveni članek
Oznake:
Leto: 2022 Vir: Institut Jožef Stefan (IJS)
Spark plasma sintering of dense alumina ceramics from industrial waste scraps
Milan Vukšić, Irena Žmak, Lidija Ćurković, Andraž Kocjan
Izvirni znanstveni članek
Oznake:
Leto: 2021 Vir: Institut Jožef Stefan (IJS)
Tuning the rheological properties of paraffin-wax ceramic feedstocks for deposition with thermoplastic 3D printing
Ipeknaz Özden, Milan Vukšić, Matevž Dular, Aljaž Iveković, Andraž Kocjan
Izvirni znanstveni članek
Oznake: additive manufacturing;material jetting;colloidal processing;
Droplet deposition with material-jetting methods such as thermoplastic 3D printing (T3DP) depends greatly on the rheological properties of the feedstocks. This study investigated the effect of particle interactions and the degree of weak flocculation on the shear thinning behaviour, the yield stress ...
Leto: 2024 Vir: Institut Jožef Stefan (IJS)
Evaluating recycling potential of waste alumina powder for ceramics production using response surface methodology
Milan Vukšić, Irena Žmak, Lidija Ćurković, Danko Čorić, Petra Jenuš, Andraž Kocjan
Izvirni znanstveni članek
Oznake:
Leto: 2021 Vir: Institut Jožef Stefan (IJS)
Photocatalytic properties of immobilised graphitic carbon nitride on the alumina substrate
Milan Vukšić, Martina Kocijan, Lidija Ćurković, Tina Radošević, Damjan Vengust, Matejka Podlogar
Izvirni znanstveni članek
Oznake:
Leto: 2022 Vir: Institut Jožef Stefan (IJS)
TiO [sub] 2-based heterostructure containing g-C [sub] 3N [sub] 4 for an effective photocatalytic treatment of a textile dye
Martina Kocijan, Milan Vukšić, Mario Kurtjak, Lidija Ćurković, Damjan Vengust, Matejka Podlogar
Izvirni znanstveni članek
Oznake: UV-A;simulated solar light;natural sunlight;water matrices;scavengers;
Water pollution has become a serious environmental issue. The textile industries using textile dyes are considered to be one of the most polluting of all industrial sectors. The application of solar-light semiconductor catalysts in wastewater treatment, among which TiO2 can be considered a prospecti ...
Leto: 2022 Vir: Institut Jožef Stefan (IJS)
Effects of airborne-particle abrasion and zirconia composition on porcelain–zirconia bond strength
Maja Antanasova, Tine Malgaj, Sandra Drev, Milan Vukšić, Peter Jevnikar, Andraž Kocjan
Izvirni znanstveni članek
Oznake: airborne-particle abrasion;Yttria-stabilized zirconia (Y-TZP);zirconia-based ceramics;
Porcelain chipping in zirconia-based dental restorations remains a major clinical complication. This study evaluated the effects of airborne-particle abrasion (APA) and yttria content in zirconia on porcelain–zirconia bond strength. Six groups were tested: low-translucency (3Y-TZP) and high-transluc ...
Leto: 2026 Vir: Institut Jožef Stefan (IJS)
ǂThe ǂrole of paraffin wax on the properties and printability of ethylene vinyl acetate-based feedstocks for alumina fused filament fabrication
Milan Vukšić, Marko Bek, Lidija Slemenik Perše, Marjeta Maček, Andraž Kocjan, Aljaž Iveković
Izvirni znanstveni članek
Oznake: additive manufacturing;fused filament fabrication;paraffin wax;alumina;
ǂThe ǂrole of paraffin wax on the properties and printability of ethylene vinyl acetate-based feedstocks for alumina fused filament fabrication
Leto: 2023 Vir: Institut Jožef Stefan (IJS)
Additive manufacturing of polymer-derived SiOC(Fe) ceramic composites as a catalyst support exhibiting magnetic heating capability
Milan Vukšić, Thomas Konegger, Martin Schwentenwein, Sašo Gyergyek, Anja Sedminek, Sandra Drev, Marijan Nečemer, Andraž Kocjan, Aljaž Iveković
Izvirni znanstveni članek
Oznake: napredna funkcionalna keramika;magnetni nanodelci;keramični nanokompozit;indukcijsko/magnetno segrevanje;preceramic polymers;magnetic nanoparticles;ceramic nanocomposite;induction/magnetic heating;advanced functional ceramics;
Additive manufacturing (AM) of advanced functional ceramics using preceramic polymers (PCPs) is gaining attention due to its processability and tailorable properties. A photosensitive resin with iron-modified polysiloxanes was developed for vat photopolymerization (VPP) to create porous SiOC(Fe) cat ...
Leto: 2026 Vir: Institut Jožef Stefan (IJS)
Št. zadetkov: 9
Ključne besede:
Leto izdaje:
Avtorji:
Repozitorij:
Tipologija:
Jezik: