Iskalni niz:
išči po
išči po
išči po
išči po
Vrsta gradiva:
Jezik:
Št. zadetkov: 8
Lastnosti lepilnih spojev lameliranega lesa iz termično modificirane bukovine
Andrej Fašalek, Bogdan Šega, Milan Šernek
Diplomsko delo
Oznake: lepljenje;termično modificiran les;bukovina;delaminacija;strižna trdnost;
Bukovina ima kljub dobrim mehanskim lastnostim še precej neizkoriščen potencial v leseni gradnji. Ima visoko gostoto in je zelo trdna, vendar pa tudi biološko neodporna in dimenzijsko nestabilna. Te nezaželene lastnosti lahko zmanjšamo s postopkom termične modifikacije. Bukov les lahko tako uporabim ...
Leto: 2017 Vir: Biotehniška fakulteta (UL BF)
Bonding performance of muf and pur adhesives for glued laminated timber
Milan Šernek, Bogdan Šega, Andrej Fašalek
Objavljeni znanstveni prispevek na konferenci
Oznake: adhesives;beech;spruce;glulam;shear strength;
Most adhesive systems for the production of glued laminated timber (GLULAM) are designed for softwoods and are therefore often not suitable for bonding hardwoods such as beech. Despite its good mechanical properties, beech wood still has a lot of untapped potential in timber construction. It has a h ...
Leto: 2025 Vir: Biotehniška fakulteta (UL BF)
Optimizacija sestave hibridnih lepljenih lameliranih nosilcev
Andrej Fašalek, Milan Šernek, Aleš Straže, Gorazd Fajdiga
Magistrsko delo
Oznake: hibridni lamelirani nosilci;nelinearne simulacije;konstrukcijsko lepljenje;
Les v zadnjih letih ponovno postaja atraktiven gradbeni material zaradi večje ekološke osveščenosti in splošnega trenda okolju prijazne graditve. Ena alternativnih možnosti uporabe bukovega lesa, ki ga imamo v Sloveniji veliko, je izdelava lepljenih lameliranih nosilcev. Zaradi nekaterih pomanjkljiv ...
Leto: 2019 Vir: Biotehniška fakulteta (UL BF)
Mechanical properties of unidirectional strand board (USB)
Lukas Malzl, Ahmadreza Ghazanfari, Andrej Fašalek, Johannes Konnerth, Benjamin Kromoser, Maximilian Pramreiter
Izvirni znanstveni članek
Oznake: laminated strand lumber;size effect;bending;tension;compression;in-plane shear;cross laminated panels;
The demand for Engineered Wood Products (EWP), such as Cross Laminated Timber (CLT), is rising as it may have the potential to reduce the environmental impact of construction. However, these products exhibit low material yields and flexibility regarding wood species. Unidirectional Strand Board (USB ...
Leto: 2025 Vir: Repozitorij Univerze na Primorskem (RUP)
Bonding performance of melamine–urea–formaldehyde and polyurethane adhesives for laminated hybrid beams and their selected mechanical properties
Andrej Fašalek, Aleš Straže, Bogdan Šega, Johannes A. J. Huber, Milan Šernek
Izvirni znanstveni članek
Oznake: lepljen lameliran les;listavci;melamin-urea-formaldehidno lepilo;poliuretansko lepilo;hardwood;glued laminated timber;construction adhesive bonding;mechanical characterization;MUF;PUR;
Leto: 2023 Vir: Biotehniška fakulteta (UL BF)
Method for evaluating the bond strength development of pMDI adhesive using ABES
Andrej Fašalek, Johannes Konnerth, Hendrikus W. G. van Herwijnen, Jan Stroobants, Maximilian Pramreiter
Izvirni znanstveni članek
Oznake: wood adhesives;isocyanate adhesives;adhesive curing;
The curing speed of adhesives is crucial in the production of wood-based panels. The Automated Bonding Evaluation System (ABES) is a commonly used method for evaluating the bond strength development of adhesives. However, using polymeric diphenyl methane diisocyanate (pMDI) with ABES can be challeng ...
Leto: 2025 Vir: Repozitorij Univerze na Primorskem (RUP)
Evaluation of bondability of different wood species using adhesives for wood-based panels
Andrej Fašalek, Lukas Malzl, Johannes Konnerth, Hendrikus W. G. van Herwijnen, Jan Stroobants, Johann Moser, Wolfgang Kantner, Christoph Gabler, Maximilian Pramreiter
Izvirni znanstveni članek
Oznake: cure kinetics;deciduous woods;lap-shear strength;
Due to climate change, European forests are expected to shift towards mixed stands, reducing softwood availability. As the wood-based panel industry relies heavily on softwoods, changes in raw material supply may affect adhesive bonding—an essential factor in panel production. This study investigate ...
Leto: 2026 Vir: Repozitorij Univerze na Primorskem (RUP)
Bond performance development of lab-scale oriented strand lumber panels with pressing time and its comparison with ABES results
Andrej Fašalek, Lukas Malzl, Johannes Konnerth, Hendrikus W. G. van Herwijnen, Heiko Thoemen, Jan Stroobants, Johann Moser, Wolfgang Kantner, Christoph Gabler, Pia Solt-Rindler, Arthur Czasch, Maximilian Pramreiter
Izvirni znanstveni članek
Oznake: hot pressing;wood-based panels;bond strength development;
A small-scale test for evaluating the cohesive strength development of adhesives, such as ASTM D7998-15, using the Automated Bonding Evaluation System (ABES), is often used in the development of wood-based panels and their adhesives. However, ABES results are not always directly transferable to pane ...
Leto: 2026 Vir: Repozitorij Univerze na Primorskem (RUP)
Št. zadetkov: 8
Ključne besede:
Leto izdaje:
Avtorji:
Repozitorij:
Tipologija:
Jezik: