Št. zadetkov: 19
Izvirni znanstveni članek
Oznake:
LIPAC;IFMIF;EVEDA;aktivacijske folije;nevtronika;activation foils;neutronics;
The Linear IFMIF Prototype Accelerator (LIPAc) aims to demonstrate the feasibility of operating a 125 mA deuteron beam up to continuous wave (CW), a key milestone for the development of future fusion-relevant neutron sources such as IFMIF-DONES and A-FNS. In this work, the deuteron irradiation distr ...
Leto:
2027
Vir:
Institut Jožef Stefan (IJS)
Izvirni znanstveni članek
Oznake:
gorivne celice;reformer;parni reforming;masna bilanca;
Leto:
2011
Vir:
dLib.si Digitalna knjižnica Slovenije
Izvirni znanstveni članek
Oznake:
jedrska fizika;
The Volumetric Neutron Source (VNS) is a compact beam-driven tokamak with D–T plasma to generate a high neutron flux that will allow the testing and qualification of fusion nuclear components, in particular the breeding blanket. Recently, EUROfusion concluded a design study that confirmed the feasib ...
Leto:
2026
Vir:
Institut Jožef Stefan (IJS)
Doktorska disertacija
Oznake:
nuclear fusion;fusion reactors;JET tokamak;neutron yield calibration;neutron detection;simulations;
Fusion reactors based on the fusion of deuterium (D) and tritium (T) emit large amounts of 14 MeV neutrons. As exactly one neutron is emitted per such fusion reaction, neutron yield measurements are the most direct way for the determination of the released energy. Accurate measurements of neutron ou ...
Leto:
2018
Vir:
Fakulteta za matematiko in fiziko (UL FMF)
Diplomsko delo
Oznake:
fuzija;reaktorji;parametrično modeliranje;STOK;Python;CAD;CadQuery;univerzitetni študij;Elektrotehnika;diplomske naloge;
Računalniško oblikovani modeli (CAD) imajo pomembno vlogo pri načrtovanju in obratovanju fuzijskih in fisijkskih reaktorjev. Uporabljajo se pri gradnji, nadgradnji naprav ter postavitvi komponent. Igrajo ključno vlogo pri izdelavi komponent, integraciji sistemov in različnih simulacijah, vključno s ...
Leto:
2023
Vir:
Fakulteta za elektrotehniko (UL FE)
Magistrsko delo
Oznake:
jedrska tehnika;jedrski reaktorji;reaktor TRIGA;aktivacija vode;KATANA;dozno polje nevtronov;dozno polje žarkov gama;fuzija;transport delcev;
Voda je eno od najpogosteje uporabljenih hladilnih sredstev, uporablja se tako v fisijskih kot tudi v fuzijskih reaktorjih. Ena od posebnosti uporabe vode kot hladila za komponente, kjer je prisoten znaten fluks nevtronov, je aktivacija te vode. Posledično lahko hladilni krog postane pomemben vir se ...
Leto:
2024
Vir:
Fakulteta za matematiko in fiziko (UL FMF)
Izvirni znanstveni članek
Oznake:
proton-berilijeva fuzija;integrirano modeliranje;plazemski vir nevtronov;donos nevtronov;proton-beryllium fusion;integrated modelling;plasma neutron source;neutron yield;
Validated integrated modelling of JET ITER-like wall experiments in which fusion performance is driven by reactions between fast ions and intrinsically present metal wall impurities is presented. A steady-state L-mode plasma with dominant proton-beryllium fusion and neutron yields of up to 6 10 is d ...
Leto:
2026
Vir:
Institut Jožef Stefan (IJS)
Izvirni znanstveni članek
Oznake:
fuzijski reaktorji;fusion reactors;electron cyclotron heating;
One of the fundamental challenges in the development of a fusion power plant is to integrate all the systems required for the operation of the power plant into a machine that fulfills all the design requirements. This includes designing sufficient shielding against neutrons and gamma rays to ensure ...
Leto:
2025
Vir:
Institut Jožef Stefan (IJS)
Magistrsko delo
Oznake:
nuclear fusion;fusion reactors;neutronics;TCV reactor;neutron shield;radiological protection;
Neutron radiation presents major challenges in the development of larger fusion reactors. The TCV, a medium-sized tokamak, needed an upgrade of the radiological shield due to an upgrade of the plasma heating system and a subsequent increase in neutron yield.
Before using the MCNP code to design ...
Leto:
2025
Vir:
Fakulteta za matematiko in fiziko (UL FMF)
Izvirni znanstveni članek
Oznake:
fuzijski reaktorji;fusion reactors;volumetric neutron source;breeding blanket testing;tokamak;remote maintenance;
The qualification of in-vessel components for a fusion power plant requires a test environment with a high flux of 14 MeV neutrons over a sufficiently large surface and volume. Performance testing and qualification of the complex design and technologies of fusion nuclear components is needed, in par ...
Leto:
2025
Vir:
Institut Jožef Stefan (IJS)