Iskalni niz:
išči po
išči po
išči po
išči po
Vrsta gradiva:
Jezik:
Št. zadetkov: 4
Modelling and optimization of dimensional accuracy and surface roughness in dry turning of Inconel 625 alloy
Djordje Vukelić, A. Milosevic, V. Ivanov, V. Kocovic, Željko Santoši, Mario Šokac, Goran Šimunović
Izvirni znanstveni članek
Oznake: CNC stroji;modeliranje;optimizacija;CNC dry turning;Inconel 625 alloy;surface roughness;dimensional accuracy;optimization;modelling;
The CNC dry turning of Inconel 625 alloy was investigated in this study. Turning was performed using different feeds, corner radii, and insert types. The dimensions and the arithmetic mean surface roughness were measured before and after turning. The influence of the input parameters and the process ...
Leto: 2024 Vir: Digitalna knjižnica Univerze v Mariboru (DKUM)
Duhovne potrebe pacienta s kronično obstruktivno pljučno boleznijo
Katarina Milosevic, Doroteja Rebec
Diplomsko delo
Oznake: duhovne potrebe;paliativna zdravstvena nega;KOPB;
Leto: 2024 Vir: Fakulteta za vede o zdravju (UP FVZ)
Comparative model analysis of two types of clamping elements in dynamic conditions
Petar Todorovic, Borut Buchmeister, Marko Djapan, Djordje Vukelić, Marko Milosevic, Branko Tadic, Milan Radenkovic
Izvirni znanstveni članek
Oznake: konstruiranje naprav;vpenjalne naprave;razvoj izdelka;analiza vpenjalnih naprav;vpenjanje;hrapavost;rezanje;clamping;clamping element design;product development;machining;cutting;compliance;fixture;roughness;analysis;dinamical behaviour;
This paper studies the compliance of the fixture-workpiece system. Workpiece clamping case with two types of clamping elements is considered. The first type of clamping element is standard, with flat top, while the second one is specially designed, with round cutting insert. Analyzed was the case of ...
Leto: 2014 Vir: Fakulteta za strojništvo (UM FS)
Influence of rotor structure on cogging torque in a surface-mounted PM-generator
Marian Greconici, Gheorghe Madescu, Daniela Milosevici, Marius Biriescu, Martian Mot
Strokovni članek
Oznake: cogging torque;electrical machines;FEM analysis;surface-mounted PM generator;
This paper deals with the analysis of the cogging torque in a surface-mounted permanent magnet generator in order to determine some techniques to minimize or eliminate the cogging torque. The simulation with finite element method (FEM) was carryout. A four-pole surface-mounted PM generator is invest ...
Leto: 2019 Vir: Fakulteta za energetiko (UM FE)
Št. zadetkov: 4
Ključne besede:
Leto izdaje:
Avtorji:
Repozitorij:
Tipologija:
Jezik: